Merge pull request #122 from datalad/3.8

Test against the oldest non-EOL Python version: 3.8

.github/workflows/test-datalad_catalog-maint.yaml

@@ -55,10 +55,10 @@ jobs:
       run: |
         git config --global user.email "[email protected]"
         git config --global user.name "GitHub Almighty"
-    - name: Set up Python 3.7
+    - name: Set up Python 3.8
       uses: actions/setup-python@v4
       with:
-        python-version: 3.7
+        python-version: 3.8
     - name: Install DataLad (maint)
       run: |
         python -m pip install --upgrade pip

.github/workflows/test-datalad_catalog-master.yaml

@@ -55,10 +55,10 @@ jobs:
       run: |
         git config --global user.email "[email protected]"
         git config --global user.name "GitHub Almighty"
-    - name: Set up Python 3.7
+    - name: Set up Python 3.8
       uses: actions/setup-python@v4
       with:
-        python-version: 3.7
+        python-version: 3.8
     - name: Install DataLad (master)
       run: |
         python -m pip install --upgrade pip

.github/workflows/test-datalad_container-maint.yaml

@@ -55,10 +55,10 @@ jobs:
       run: |
         git config --global user.email "[email protected]"
         git config --global user.name "GitHub Almighty"
-    - name: Set up Python 3.7
+    - name: Set up Python 3.8
       uses: actions/setup-python@v4
       with:
-        python-version: 3.7
+        python-version: 3.8
     - name: Install DataLad (maint)
       run: |
         python -m pip install --upgrade pip

.github/workflows/test-datalad_container-master.yaml

@@ -55,10 +55,10 @@ jobs:
       run: |
         git config --global user.email "[email protected]"
         git config --global user.name "GitHub Almighty"
-    - name: Set up Python 3.7
+    - name: Set up Python 3.8
       uses: actions/setup-python@v4
       with:
-        python-version: 3.7
+        python-version: 3.8
     - name: Install DataLad (master)
       run: |
         python -m pip install --upgrade pip

.github/workflows/test-datalad_crawler-maint.yaml

@@ -55,10 +55,10 @@ jobs:
       run: |
         git config --global user.email "[email protected]"
         git config --global user.name "GitHub Almighty"
-    - name: Set up Python 3.7
+    - name: Set up Python 3.8
       uses: actions/setup-python@v4
       with:
-        python-version: 3.7
+        python-version: 3.8
     - name: Install DataLad (maint)
       run: |
         python -m pip install --upgrade pip

.github/workflows/test-datalad_crawler-master.yaml

@@ -55,10 +55,10 @@ jobs:
       run: |
         git config --global user.email "[email protected]"
         git config --global user.name "GitHub Almighty"
-    - name: Set up Python 3.7
+    - name: Set up Python 3.8
       uses: actions/setup-python@v4
       with:
-        python-version: 3.7
+        python-version: 3.8
     - name: Install DataLad (master)
       run: |
         python -m pip install --upgrade pip

.github/workflows/test-datalad_dataverse-maint.yaml

@@ -55,10 +55,10 @@ jobs:
       run: |
         git config --global user.email "[email protected]"
         git config --global user.name "GitHub Almighty"
-    - name: Set up Python 3.7
+    - name: Set up Python 3.8
       uses: actions/setup-python@v4
       with:
-        python-version: 3.7
+        python-version: 3.8
     - name: Install DataLad (maint)
       run: |
         python -m pip install --upgrade pip

.github/workflows/test-datalad_dataverse-master.yaml

@@ -55,10 +55,10 @@ jobs:
       run: |
         git config --global user.email "[email protected]"
         git config --global user.name "GitHub Almighty"
-    - name: Set up Python 3.7
+    - name: Set up Python 3.8
       uses: actions/setup-python@v4
       with:
-        python-version: 3.7
+        python-version: 3.8
     - name: Install DataLad (master)
       run: |
         python -m pip install --upgrade pip

.github/workflows/test-datalad_deprecated-maint.yaml

@@ -55,10 +55,10 @@ jobs:
       run: |
         git config --global user.email "[email protected]"
         git config --global user.name "GitHub Almighty"
-    - name: Set up Python 3.7
+    - name: Set up Python 3.8
       uses: actions/setup-python@v4
       with:
-        python-version: 3.7
+        python-version: 3.8
     - name: Install DataLad (maint)
       run: |
         python -m pip install --upgrade pip

.github/workflows/test-datalad_deprecated-master.yaml

@@ -55,10 +55,10 @@ jobs:
       run: |
         git config --global user.email "[email protected]"
         git config --global user.name "GitHub Almighty"
-    - name: Set up Python 3.7
+    - name: Set up Python 3.8
       uses: actions/setup-python@v4
       with:
-        python-version: 3.7
+        python-version: 3.8
     - name: Install DataLad (master)
       run: |
         python -m pip install --upgrade pip

.github/workflows/test-datalad_fuse-maint.yaml

@@ -55,10 +55,10 @@ jobs:
       run: |
         git config --global user.email "[email protected]"
         git config --global user.name "GitHub Almighty"
-    - name: Set up Python 3.7
+    - name: Set up Python 3.8
       uses: actions/setup-python@v4
       with:
-        python-version: 3.7
+        python-version: 3.8
     - name: Install DataLad (maint)
       run: |
         python -m pip install --upgrade pip

.github/workflows/test-datalad_fuse-master.yaml

@@ -55,10 +55,10 @@ jobs:
       run: |
         git config --global user.email "[email protected]"
         git config --global user.name "GitHub Almighty"
-    - name: Set up Python 3.7
+    - name: Set up Python 3.8
       uses: actions/setup-python@v4
       with:
-        python-version: 3.7
+        python-version: 3.8
     - name: Install DataLad (master)
       run: |
         python -m pip install --upgrade pip

.github/workflows/test-datalad_gooey-maint.yaml

@@ -55,10 +55,10 @@ jobs:
       run: |
         git config --global user.email "[email protected]"
         git config --global user.name "GitHub Almighty"
-    - name: Set up Python 3.7
+    - name: Set up Python 3.8
       uses: actions/setup-python@v4
       with:
-        python-version: 3.7
+        python-version: 3.8
     - name: Install DataLad (maint)
       run: |
         python -m pip install --upgrade pip

.github/workflows/test-datalad_gooey-master.yaml

@@ -55,10 +55,10 @@ jobs:
       run: |
         git config --global user.email "[email protected]"
         git config --global user.name "GitHub Almighty"
-    - name: Set up Python 3.7
+    - name: Set up Python 3.8
       uses: actions/setup-python@v4
       with:
-        python-version: 3.7
+        python-version: 3.8
     - name: Install DataLad (master)
       run: |
         python -m pip install --upgrade pip

.github/workflows/test-datalad_metalad-maint.yaml

@@ -55,10 +55,10 @@ jobs:
       run: |
         git config --global user.email "[email protected]"
         git config --global user.name "GitHub Almighty"
-    - name: Set up Python 3.7
+    - name: Set up Python 3.8
       uses: actions/setup-python@v4
       with:
-        python-version: 3.7
+        python-version: 3.8
     - name: Install DataLad (maint)
       run: |
         python -m pip install --upgrade pip

.github/workflows/test-datalad_metalad-master.yaml

@@ -55,10 +55,10 @@ jobs:
       run: |
         git config --global user.email "[email protected]"
         git config --global user.name "GitHub Almighty"
-    - name: Set up Python 3.7
+    - name: Set up Python 3.8
       uses: actions/setup-python@v4
       with:
-        python-version: 3.7
+        python-version: 3.8
     - name: Install DataLad (master)
       run: |
         python -m pip install --upgrade pip

.github/workflows/test-datalad_neuroimaging-maint.yaml

@@ -55,10 +55,10 @@ jobs:
       run: |
         git config --global user.email "[email protected]"
         git config --global user.name "GitHub Almighty"
-    - name: Set up Python 3.7
+    - name: Set up Python 3.8
       uses: actions/setup-python@v4
       with:
-        python-version: 3.7
+        python-version: 3.8
     - name: Install DataLad (maint)
       run: |
         python -m pip install --upgrade pip

.github/workflows/test-datalad_neuroimaging-master.yaml

@@ -55,10 +55,10 @@ jobs:
       run: |
         git config --global user.email "[email protected]"
         git config --global user.name "GitHub Almighty"
-    - name: Set up Python 3.7
+    - name: Set up Python 3.8
       uses: actions/setup-python@v4
       with:
-        python-version: 3.7
+        python-version: 3.8
     - name: Install DataLad (master)
       run: |
         python -m pip install --upgrade pip

.github/workflows/test-datalad_next-maint.yaml

@@ -55,10 +55,10 @@ jobs:
       run: |
         git config --global user.email "[email protected]"
         git config --global user.name "GitHub Almighty"
-    - name: Set up Python 3.7
+    - name: Set up Python 3.8
       uses: actions/setup-python@v4
       with:
-        python-version: 3.7
+        python-version: 3.8
     - name: Install DataLad (maint)
       run: |
         python -m pip install --upgrade pip

.github/workflows/test-datalad_next-master.yaml

@@ -55,10 +55,10 @@ jobs:
       run: |
         git config --global user.email "[email protected]"
         git config --global user.name "GitHub Almighty"
-    - name: Set up Python 3.7
+    - name: Set up Python 3.8
       uses: actions/setup-python@v4
       with:
-        python-version: 3.7
+        python-version: 3.8
     - name: Install DataLad (master)
       run: |
         python -m pip install --upgrade pip

.github/workflows/test-datalad_osf-maint.yaml

@@ -55,10 +55,10 @@ jobs:
       run: |
         git config --global user.email "[email protected]"
         git config --global user.name "GitHub Almighty"
-    - name: Set up Python 3.7
+    - name: Set up Python 3.8
       uses: actions/setup-python@v4
       with:
-        python-version: 3.7
+        python-version: 3.8
     - name: Install DataLad (maint)
       run: |
         python -m pip install --upgrade pip

.github/workflows/test-datalad_osf-master.yaml

@@ -55,10 +55,10 @@ jobs:
       run: |
         git config --global user.email "[email protected]"
         git config --global user.name "GitHub Almighty"
-    - name: Set up Python 3.7
+    - name: Set up Python 3.8
       uses: actions/setup-python@v4
       with:
-        python-version: 3.7
+        python-version: 3.8
     - name: Install DataLad (master)
       run: |
         python -m pip install --upgrade pip

.github/workflows/test-datalad_ukbiobank-maint.yaml

@@ -55,10 +55,10 @@ jobs:
       run: |
         git config --global user.email "[email protected]"
         git config --global user.name "GitHub Almighty"
-    - name: Set up Python 3.7
+    - name: Set up Python 3.8
       uses: actions/setup-python@v4
       with:
-        python-version: 3.7
+        python-version: 3.8
     - name: Install DataLad (maint)
       run: |
         python -m pip install --upgrade pip

.github/workflows/test-datalad_ukbiobank-master.yaml

@@ -55,10 +55,10 @@ jobs:
       run: |
         git config --global user.email "[email protected]"
         git config --global user.name "GitHub Almighty"
-    - name: Set up Python 3.7
+    - name: Set up Python 3.8
       uses: actions/setup-python@v4
       with:
-        python-version: 3.7
+        python-version: 3.8
     - name: Install DataLad (master)
       run: |
         python -m pip install --upgrade pip

.github/workflows/test-datalad_xnat-maint.yaml

@@ -55,10 +55,10 @@ jobs:
       run: |
         git config --global user.email "[email protected]"
         git config --global user.name "GitHub Almighty"
-    - name: Set up Python 3.7
+    - name: Set up Python 3.8
       uses: actions/setup-python@v4
       with:
-        python-version: 3.7
+        python-version: 3.8
     - name: Install DataLad (maint)
       run: |
         python -m pip install --upgrade pip

.github/workflows/test-datalad_xnat-master.yaml

@@ -55,10 +55,10 @@ jobs:
       run: |
         git config --global user.email "[email protected]"
         git config --global user.name "GitHub Almighty"
-    - name: Set up Python 3.7
+    - name: Set up Python 3.8
       uses: actions/setup-python@v4
       with:
-        python-version: 3.7
+        python-version: 3.8
     - name: Install DataLad (master)
       run: |
         python -m pip install --upgrade pip